ASC70027

DR10 Drag Race Car Team Kit

The DR10 Team Kit features rear anti-roll bar, 26 precision ball bearings, a water-resistant enclosed receiver box, fully adjustable suspension, vertical ball ends for roll center adjustments, and 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch.

-Three-position wheelie bar with optional large wheels
-Lightweight drag race inspired wheels
-Rear anti-roll bar
-Rear silicone diff fluid
-Durable and lightweight aluminum top shaft
-Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate for both NiMh and 2/3s LiPo battery packs
-Durable front and rear body mounts
-Rear CVA driveshafts for more reliability
-Aluminum 12mm big bore coil-over shock absorbers
-2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
-Rugged steel turnbuckles for adjustable camber and front toe-in
-Fully adjustable suspension geometry
-Vertical ball ends for roll center adjustments, front and rear
-Water-resistant, enclosed receiver box
-Metric hardware throughout
-26 precision ball bearings

(Tires, battery, and other components pictured are NOT included)

ITEMS NEEDED TO COMPLETE:

-540-size electric RC motor (#27452 Sonic 540-M4 Modified Motor 4.5)
-Electronic speed control (#27005 Blackbox 510R Competition ESC w/PROgrammer2)
-2-3 cell 7.4V-11.1V LiPo or 6-7cell NiMH battery pack (#27344 Zappers SG3 8200mAh 115C 7.6V Stick)
-Battery charger
-2-channel surface transmitter and receiver
-Steering servo (#27101 RT1508 Digital HV Hi-Torque Competition Servo)
-1:10 scale 2.2" / 3.0" rear tires and 2.2" front tires
-CA glue for tires and wheels
-1:10 scale Drag Racing (No-Prep) body (#71082 DR10 Reakt Drag Body, clear)
-Polycarbonate-specific spray paint for body, and body scissors

HADMCL2015

DRK 160+ TSR Edition Drag Race ESC

In collaboration with Tim Smith, this DRK 160+ TSR Edition has evolved with a lot of improvement over its predecessor. It is the only ESC that was designed and built by drag racers for drag racers.

What is included in the DRK 160+ TSR Edition box?
DRK 160+ TSR Edition ESC x1
20cm receiver cable (MCL4243) x1
ESC power switch (MCL4242) x1
30x30 HV ESC fan (MCL4246) x1
USB data cable (MCL4054) x1
Maclan decal x1

Programing Options:
There are few options to program the DRK 160 ESC.
Use a ProLink (with cables included in the ProLink, micro USB + OTG cable)
Use a Windows PC and Maclan Panel Software (with cable included in the ESC)
Use an Android mobile device (5.0 OS or higher) and Maclan Smart Link App (with Type C cable, sold separately)
Use an Apple iPhone with Maclan WiFi module (sold separately) with Maclan Smart Link App

Important Tips:
DRK 160+ TSR Edition ESC preset profiles are based on 20-degree motor can timing. For best results, set motor can timing to 20 degrees or lower.
When installing your new DRK ESC, please set the radio to factory settings, or use a new, unused model. Using "radio tricks" for throttle manipulation is unnecessary and could cause problems with the ESC, resulting in poor performance, or a damaged ESC. The DRK ESC is designed to replace all other methods of manipulating the throttle.

This DRK 160+ ESC has the following new and noticeable features that make it so supreme over competitors:

Features:

Proprietary all-new 7-Stage launch power control software (Version T19.01)

All new 70 degrees turbo timing for more power

Factory pre-soldered 10AWG wires

Upgraded control board for more durable control circuit

New high capacity DRK Super Capacitor

Improved data logging with higher resolution and crop function

HADMCL1065

MRR DRK Drag Race King 3.0T Motor

DRK Drag Motor is based on the successful V2 platform with various updates to improve overall performance specifically for the drag race. It is a pure drag race motor to work the best with the DRK 160 ESC.

The DRK motor have some remarkable features:
Engineered & Developed right here in the U.S.A.
100% hand built.
All new 13mm DRK Ultra High Torque Rotor (MCL4218).
Precise aligned sensor gap for most accurate reading.

Specifications:

Turns: 3.0T

Case Length: 2.02in/51.50mm

Case Diameter: 1.42in/36mm

Shaft Extension: 0.552in/14mm

Shaft Size: 3.17mm

Weight: 155g

Collection: OMGRC

Filter and sort